You are here:

Công ty TNHH Công nghệ Tự động – CommanD Automation

GE PAC RX3i

PACSystems RX3i
alt

The PACSystems RX3i controller is the latest addition to the innovative PACSystems family of programmable automation controllers (PACs). Like the rest of the family, the PACSystems RX3i features a single control engine and The other person may do the same during or after. Transsexual pornography is a genre of pornography. Entacle erotica describes a type of pornography most commonly found in Japan which integrates traditional pornography with elements of bestiality and a fantasy, horror, or science-fiction theme. Multiple men and women Bisexual pornography features one woman and two men who all perform sex acts on each other. Gloryhole pornography features women performing fellatio on unidentified men through a small hole made in a bathroom divider. Jerk off instruction features a performer encouraging or instructing the viewer to masturbate, often culminating in a countdown at the end of which the viewer is invited to induce orgasm. Dwarfs or midget pornography features performers who are dwarfs/midgets. Pregnancy fetishism is a context where pregnancy is seen by individuals viagra generic or cultures as an erotic phenomenon. Hardcore pornography is pornography that depicts penetration or extreme fetish acts, or both. Two women tapegagged and cuffed to iron bars Bondage and Discipline are two aspects of BDSM that do not seem to relate to each other because of the type of activities involved, but they have conceptual similarities, and that is why they appear jointly. A crush fetish is a fetish in which one is sexually aroused usually when someone crushes objects, food, and sometimes small animals with their body, usually under their foot, or when crushed oneself. In general, BDSM play is usually structured such that it is possible for the consenting partner to withdraw his or her consent during a scene; for example, by using a safeword that was agreed on in advance. Ass to mouth pornography shows the transfer of a performer penis from a second performer anus to that same second performer mouth in a single shot. Bisexual pornography is a genre of pornography which most typically depicts one woman and two men who all perform sex acts on each other. There is no singular or archetypical behavior; therefore, a wide range of thought patterns and behaviors exist, but all tends to be a harmless and efficacious release from some kind of pressure. universal programming environment to provide application portability across multiple hardware platforms and deliver a true convergence of control choices.


    The RX3i features

    • A high performance controller with a 300 MHz Intel® microprocessor and 10 Mbytes of user memory that eliminates the need for multiple controllers and simplifies control.
    • A universal backplane with a highspeed PCI bus running at 27 MHz for fast data throughput for complex I/O and a serial bus for simple I/O that optimizes performance and your investment. The universal backplane also supports HOT SWAP to minimize downtime.
    • A wide range of I/O modules (over 40 types available) for simple to complex applications; various network modules are also available.

    The PACSystems portable control engine provides high performance on several different platforms, allowing OEMs and end users with application variability to choose the exact control system hardware that best suits their needs - all in a single, compact and highly integrated package.

    Additional Information

    Liên hệ :

    • Đặt hàng: Địa chỉ email này đã được bảo vệ từ spam bots, bạn cần kích hoạt Javascript để xem nó. , Tel: 08.22030445
    • Địa chỉ email này đã được bảo vệ từ spam bots, bạn cần kích hoạt Javascript để xem nó. Địa chỉ email này đã được bảo vệ từ spam bots, bạn cần kích hoạt Javascript để xem nó. , Tel: 08.22211903
    • Đào tạo: Etraining@commandag.com

    Hỗ trợ Online: Tư vấn Kỹ thuật Click here to chat      Mua hàng: Click here to chat 

       Mã đặt hàng và thông số kỹ thuật:

    CPU Modules:

    Part # Description
    IC695CPE305 CPE305 single slot CPU, 1.1Ghz processor,5 Meg user memory, 1 RS-232 port (IC693CBL316 cable), 1 Ethernet port (SRTP Programmer support only) and a USB master port upload/download only.  Ships with Energy PAC IC695ACC400).
    IC695CPE305CA Conformal Coated. CPE305 single slot CPU, 1.1Ghz processor,5 Meg user memory, 1 RS-232 port (IC693CBL316 cable), 1 Ethernet port (SRTP Programmer support only) and a USB master port upload/download only. Ships with Energy PAC IC695ACC400).
    IC695CPE310 CPE310 2 slot CPU, 1.1Ghz processor,10 Meg memory, 1 RS-232 port, 1 RS- 485 port,1 Ethernet port (SRTP programmer support only) and USB master port for application upload/download only.Replacement for IC695CPU310. CPE310 ships with Energy PAC (IC695A
    IC695CPE310CA Conformal Coated. CPE310 2 slot CPU, 1.1Ghz processor,10 Meg memory, 1 RS-232 port, 1 RS- 485 port,1 Ethernet port (SRTP programmer support only) and USB master port for application upload/download only.Replacement for IC695CPU310. CPE310 ships with
    IC695CPU310RS Refurbished IC695CPU310 Classic. 300Mhz CPU with 10Meg of memory 2 SERIAL PORTS (occupies two slots on system base)
    IC695CPU315 1Ghz CPU with 20Meg of memory 2 SERIAL PORTS (occupies two slots on system base).  Battery not included, order external high capacity battery IC693ACC302 seperately.  Estimate data retention is 30 days at 20C of continous battery back up.
    IC695CPU315CA RX3I 1GHZ CPU W/2 SER PORTS CONF COAT
    IC695CPU320 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base).  Battery not included, order external high capacity battery IC693ACC302 seperately.  Estimate data retention is 30 days at 20C of continous battery back up.
    IC695CRU320 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base) redundant CPU. External high capacity battery IC693ACC302 required.  The CRU320 supports both Genius LAN and Ethernet LAN.  Dual Genius LAN is supported by an applicati
    IC695CRU320CA Conformal coated.  1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base) redundant CPU.  External high capacity battery IC693ACC302 required.  The CRU320 will only work with RX3i ENIU remote I/O and Genius LAN.
    IC695NKT001CA RX3i Ethernet NIU Kit Conformal Coated includes NIU (IC695NIU001) and Ethernet module (IC695ETM001).  ENIU supports two serial ports and 20k of local logic.  TheENIU must be installed in a IC695CHSxxx base.
    IC695NKT002CA RX3i one NIU001 and two ETM001 Conformal

     

    System Modules:

    Part # Description
    GFK-2314 PACSystems RX3i System Manual
    IC646MXN001 Max-ON RX3i Hot Standby Redundancy Software
    IC694CHS392 Base Expansion 10 Slots
    IC694CHS392CA Conformal Coated 10 slot I/O expansion base.
    IC694CHS398 Base Expansion 5 Slots
    IC694CHS398CA Conformal Coated 5 slot expansion base.
    IC694PWR321 Power Supply 120/240 VAC 125 VDC Standard
    IC694PWR321CA Conformal Coated Power Supply 120/240VAC, standard.
    IC694PWR330 Power Supply 120/240 Vac 125 Vdc High Capacity
    IC694PWR330CA Conformal Coated Power Supply 120/240VAC 125VDC, added capacity.
    IC694PWR331 Power Supply 24 Vdc High Capacity.
    IC694PWR331CA Conformal Coated Power Supply 24VDC, added capacity
    IC695CHS007 7 Slot Universal Base. Slot 0 limited to power supply (IC695PSxxx) only and slot 6 is a PCI slot only (IC695xxx).  Slots 1 through 5 support both PCI and high speed serial connection (IC695xxx and IC694xxx)
    IC695CHS012 RX3i 12 slot universal base
    IC695CHS012CA RX3i 12 slot universal backplane. Conformal Coated.
    IC695CHS016 RX3i 16 universal modules slots base
    IC695CHS016CA RX3i 16 universal slots backplane with conformal coating.
    IC695CMU310RS Refurbished The CMU310 is on marketing hold due to component shortage. Please quote IC695CRU320 High Availability and request special pricing to match IC695CRU320 and IC695RMX128. RX3i Redundant High Availability CPU with two built-in serial ports. T
    IC695LRE001 RX3i Local Expansion Module Occupies no system slots on base
    IC695LRE001CA RX3i Local Serial Expansion Conformal Coated.
    IC695PSA040 RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two slots on s ystem base.
    IC695PSA040CA RX3i AC Power Supply, 40 Watt Conformal Coated
    IC695PSA140 120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load -sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. It can be used as the only power supply in the backplan
    IC695PSA140CA RX3i Conformal Coated 120/240VAC, 125VDC Multipurpose Power Supply is suitable for use in load-sharing and redundancy application.
    IC695PSD040 RX3i 24VDC power supply, 40 watts.
    IC695PSD040CA RX3i 24VDC power supply, 40 Watt Conformal Coated.
    IC695PSD140 Multipurpose Power Supply is suitable for use in load-sharing and redund ancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane.
    IC695PSD140CA 24VDC  Multipurpose Power Supply CONFORMAL COATED is suitable for use in load-sharing and redundancy application. It must be installed in a PACsystems RX3i (IC695catalog number) Universal Backplane. It can be used as the only power supply in the back

     

    Communication Modules:

    Part # Description
    IC694BEM321 RX3I Communication Module, I/O Link Interface Module (Master).  Module is on the high speed serial bus.
    IC694BEM331 RX3i Genius Bus Controller (supports I/O and Datagrams). Module connectsto the serial bus. Requires CPU firmware 2.9 or higher and requires Proficy Machine Edition Version 5.00 SP1A Logic Developer-PLC, Hot Fix 1or later for configuration.
    IC694BEM331CA Conformal Coated Genius Bus Controller
    IC694DNM200 DeviceNet Master Module for RX3i.  Module can only be located in the CPUbase.  The module is on the high speed serial bus.
    IC695ALG626RS Refurbished Analog Input HART module, 16 channels single ended, 8 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1
    IC695ALG628RS Refurbished Analog Input HART module, 8 channels single ended, 4 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA; Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 t
    IC695CMM002 RX3i serial communications module.  Two isolated RS-232/485 port.  Supports Serial Read/Write and Modbus Master/Slave.  Requires Unversal Backplane.
    IC695CMM002CA RX3i serial communications module.  Two isolated RS-232/485 port.  Supports Serial Read/Write and Modbus Master/Slave.  Requires Unversal Backplane. Conformal Coated
    IC695CMM004 RX3i serial communications module.  Four isolated RS-232/485 port.  Supports Serial Read/Write and Modbus Master/Slave.  Requires Unversal Backplane.
    IC695CMX128 Control Memory Xchange Module 128Megbytes of user shared memory.
    IC695ETM001 Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base
    IC695ETM001CA RX3i Ethernet Mdl,10/100Mbits,Conformal Coated.
    IC695NIU001 RX3i NIU with two serial ports and 20K of local logic.  Module requires Universal base (IC695CHSxxx) and requires Ethernet module (IC695ETM001).NIU supports all RX3i I/O modules.
    IC695NKT001 RX3i Ethernet NIU Kit includes NIU (IC695NIU001) and Ethernet module (IC695ETM001).  ENIU supports two serial ports and 20k of local logic. TheENIU must be installed in a IC695CHSxxx base.
    IC695NKT002 RX3i Ethernet NIU Kit with two Ethernet modules.
    IC695PBM300 RX3i PROFIBUS Master Module (must be installed on RX3i PCI bus).  The mo dule supports PROFIBUS V1 Master functionality.
    IC695PBM300CA RX3i PROFIBUS Master, Conformal Coated, Module (must be installed on RX3i PCI bus).  The module supports PROFIBUS V1 Master functionality.
    IC695PBS301 RX3i Profibus Slave module supports V1 functionality.
    IC695PNC001 Profinet Controller. The PNC module provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 device, running at both 100Mbps and 1Gbps.  Compatible with IC695CPU315, CPU320, CPE310 and CPE305 only a
    IC695PRS015 Pressure Transducer module. The serial port communicates with up to 15 Honeywell LG1237 Smart Pressure Transducer sensors.  Requires firmware/software 6.5 or higher.
    IC695RMX128 RX3i Redundant Memory Xchange Module for High Availability.  2Megbytes of user shared memory.  Dual Genius LAN is supported using application code that is located on the ge-ip.com/support website.
    IC695RMX128CA Conformal coated.  RX3i Redundant Memory Xchange Module for High Availability.  2Megbytes of user shared memory.

     

    IO Module:  

    * Analog:

    Part # Description
    IC694ALG220 Input module, analog 4 point voltage.
    IC694ALG221 Input module, analog 4 point current.
    IC694ALG221CA Conformal Coated Input module, analog 4 point current.
    IC694ALG222 Input module, analog 16 point single ended/8 channel differential, voltage.
    IC694ALG222CA Conformal Coated Analog Voltage Input module 16 channels single ended/ 8channels differential
    IC694ALG223 Input module, analog 16 point single ended, current.
    IC694ALG223CA Input module, analog 16 point single ended, current.
    IC694ALG232 RX3i Efficiency 16-Channel Advanced Analog Voltage Input module provides 16 single-ended or 8 differential input channels. 0 to 10 V (unipolar), -10 to +10V (bipolar) with 16 bit resolution. Advanced diagnostics. Requires Proficy® Machine Edition Log
    IC694ALG232CA Conformal Coated RX3i Efficiency 16-Channel Advanced Analog Voltage Input module provides 16 single-ended or 8 differential input channels. 0 to 10 V (unipolar), -10 to +10V (bipolar) with 16 bit resolution. Advanced diagnostics. Requires Proficy® Ma
    IC694ALG232LT Low Temperature.  RX3i Efficiency 16-Channel Advanced Analog Voltage Input module provides 16 single-ended or 8 differential input channels. 0 to 10 V (unipolar), -10 to +10V (bipolar) with 16 bit resolution. Advanced diagnostics. Requires Proficy® M
    IC694ALG233 RX3i Efficiency 16-Channel Advanced Analog Current Input module provides 16 single-ended or 8 differential input channels. 0 - 20mA and 4 - 20mA with 16 bit resolution. Advanced diagnostics.  Requires Proficy® Machine Edition Logic Developer 6.5 SIM
    IC694ALG233CA Conformal Coated RX3i Efficiency 16-Channel Advanced Analog Current Input module provides 16 single-ended or 8 differential input channels. 0 - 20mA and 4 - 20mA with 16 bit resolution. Advanced diagnostics. Requires Proficy® Machine Edition Logic De
    IC694ALG233LT Low Temperature.  RX3i Efficiency 16-Channel Advanced Analog Current Input module provides 16 single-ended or 8 differential input channels. 0 - 20mA and 4 - 20mA with 16 bit resolution. Advanced diagnostics. Requires Proficy® Machine Edition Logic D
    IC694ALG442 Analog combination module current/voltage 4 inputs 2 outputs.
    IC694ALG442CA Conformal Coated Analog Input module, 4 in and 2 out.  Voltage and current supported.
    IC694ALG542 RX3i Efficiency combination analog module, 4 in voltage/current and 2 out voltage/current with 16 bit resolution and advanced diagnostics. Requires Proficy® Machine Edition Logic Developer 6.5 SIM 5 and above CPU firmware 6.5 and above.
    IC694ALG542CA Conformal Coated RX3i Efficiency combination analog module, 4 in voltage/current and 2 out voltage/current with 16 bit resolution and advanced diagnostics. Requires Proficy® Machine Edition Logic Developer 6.5 SIM 5 and above CPU firmware 6.5 and abo
    IC694ALG542LT Low Temperature RX3i Efficiency combination analog module, 4 in voltage/current and 2 out voltage/current with 16 bit resolution and advanced diagnostics. Requires Proficy® Machine Edition Logic Developer 6.5 SIM 5 and above CPU firmware 6.5 and abov
    IC694APU300CA Conformal Coated High speed counter module 200KHZ A B and C type.
    IC695ALG106 Isolated Analog module, 6 individual isolated channels are configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032.
    IC695ALG112 Isolated Analog module, 12 individual isolated channels are configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032.
    IC695ALG112CA RX3i Isolated Analog module, conformal coated, 12 individual isolated channels are configurable for voltage and current.  Requires high capacity terminal block IC694TBB032 or IC694TBS032.
    IC695ALG306 Isolated Thermocouple Input module provides six isolated differential thermocouple input channels. Each channel can be individually configured for inputs from: Thermocouple types: J, K, T, E, R, S, B, N, or C and Voltage: +/-150mV or +/-50mV. Module
    IC695ALG312 Isolated Thermocouple Input module provides twelve isolated differential thermocouple input channels. Each channel can be individually configured for inputs from: Thermocouple types: J, K, T, E, R, S, B, N, or C and Voltage: +/-150mV or +/-50mV.  Mod
    IC695ALG412 High Speed 12 channel isolated thermocouple module with increased noise rejection.  Requires firmware and software 6.5 and higher.
    IC695ALG508 RX3i Isolated RTD Input module provides eight isolated differential RTD input channels. Each channel can be individually configured for 2, 3, 4 wire RTD or Resistance. Requires high capacity terminal block IC694TBB032 or IC694TBS032
    IC695ALG508CA Conformal Coated RX3i Isolated RTD Input module provides eight isolated differential RTD input channels. Each channel can be individually configured for 2, 3, 4 wire RTD or Resistance.  Requires high capacity terminal block IC694TBB032 or IC694TBS032
    IC695ALG600 UNIVERSAL ANALOG MODULE. 8 CHANNELS OF ANALOG CONFIGURABLE FOR THERMOCOUPLE,RTD, RESISTIVE, CURRENT, OR VOLTAGE.  2 ISOLATED GROUPS, 4 CHANNELS PER GROUP. Terminal block ordered separately.
    IC695ALG600CA Conformal Coated Universal Analog Input module.  Terminal block not included.
    IC695ALG608 Analog Input module, 8 channels single ended, 4 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA;  Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V.   The anal
    IC695ALG608CA Conformal Coated Analog Input Module, 8 Channel voltage/current. Module does not include terminal block.
    IC695ALG608RS Refurbished Analog Input module, 8 channels single ended, 4 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA;  Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V
    IC695ALG616 Analog Input module, 16 channels single ended, 8 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA;  Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V.   The ana
    IC695ALG616CA Conformal Coated Analog Input Module,16 channel voltage/current.
    IC695ALG616RS Refurbished Analog Input module, 16 channels single ended, 8 channels differential, channels are configurable for voltage and current. Can be configured for Current: 0 to 20mA, 4 to 20mA, +/- 20mA;  Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5
    IC695ALG626 Analog Input HART module, 16 channels single ended, 8 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA;  Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V.  The
    IC695ALG628 Analog Input HART module, 8 channels single ended, 4 channels differential,channels are configurable for voltage,current and current/ HART. Supports Current: 0 to 20mA, 4 to 20mA, +/- 20mA;  Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V.  The

    Part # Description
    IC694ALG390 OUTPUT MODULE ANALOG 2 POINT VOLTAGE
    IC694ALG391 Output module analog 2 points, current.
    IC694ALG391CA Conformal Coated Analog Current Output module, 2 channels.
    IC694ALG392 Output module analog 8 points, voltage/current.
    IC694ALG392CA Conformal Coated Output module analog 8 points, voltage/current.
    IC695ALG704 Analog Output Module, 4 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA;  Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated.  Up to 16 bit resolution. Requires high capacity terminal block IC
    IC695ALG704CA Conformal Coated Analog Output Module,4 channel voltage/current.  Module  does not include terminal block.
    IC695ALG708 Analog Output Module, 8 channels,that is configurable for voltage and current, configured for Current: 0 to 20mA, 4 to 20mA;  Voltage: +/- 10 VDC, 0 to 10VDC per channel non isolated.  Up to 16 bit resolution. Requires high capacity terminal block IC
    IC695ALG708CA Conformal Coated Analog Output Module,8 channel voltage/current.  Moduledoes not include terminal block.
    IC695ALG728 Analog Output HART Module, 8 channels,that is configurable for voltage, current, current/HART configured for Current: 0 to 20mA, 4 to 20mA; Voltage: +/- 10VDC, 0 to 10VDC per channel non isolated.  Up to 16 bit resolution.  Requires high capacity ter
    IC695ALG808 Isolated Analog Output module, 8 channels, that is configurable for voltage and current. Requires high capacity terminal block IC694TBB032 or IC694TBS032.
    IC695ALG808CA RX3i Isolated Analog Output module conformal coated, 8 channels, that is configurable for voltage and current.  Requires high capacity terminal block IC694TBB032 or IC694TBS032.

     

    * Digital:

    Part # Description
    IC694MDL230 Input module, 120 VAC 8 point, isolated per point.
    IC694MDL230CA Conformal Coated Input module, 120VAC 8 point isolated.
    IC694MDL231 Input module, 240 VAC 8 point, isolated per point.
    IC694MDL240 Input module 120 VAC, 16 points.
    IC694MDL240CA Conformal Coated Input module 120 VAC 16 point
    IC694MDL241 Input module 24 VAC, 16 points.
    IC694MDL241CA Conformal Coated Input 24 VAC 16 points.
    IC694MDL250 120 Vac Isolated Input (16 points).  Module requires a terminal block IC694TBBx32 or IC693TBSx32).  Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard expansion base. Requires firmware 3.5 and
    IC694MDL260 Input module 120 VAC, 32 points.  Module requires a terminal block IC694TBBx32 or IC693TBSx32). Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard expansion base.  Requires firmware 3.5 and abo
    IC694MDL310 Output module, 120 VAC 0.5 amps 12 points.
    IC694MDL330 Output module 120/240 VAC 2amps 8 Points.
    IC694MDL340 Output module 120 VAC 0.5 amps 16 Points.
    IC694MDL340CA Conformal Coated 120/240 Output module, 0.5A,16 points
    IC694MDL350 120/240 Vac Isolated Output, 2 Amp (16 Points). Module requires a terminal block (IC694TBBx32 or IC693TBSx32).  Only compatible with RX3i controllers. Compatible high speed serial bus on both Universal Base and Standard.  Requires firmware 3.5 and ME
    IC694MDL390 Output module 120/240VAC 2 amps 5 point isolated.
    IC694MDL390CA Conformal Coated OUTPUT module 120/240 VAC 2A 5 point, isolated per point
    IC694MDL632 Input module 125 VDC 8 point POS/NEG logic.
    IC694MDL632CA Conformal Coated Input module 125 VDC 8 point NEG/POS logic.
    IC694MDL634 Input module 24 VDC 8 point POS/NEG logic.
    IC694MDL635 Input module 125 VDC 16 point POS/NEG logic.  Module does not have UL certification on revision A.
    IC694MDL645 Input module 24 VDC 16 point POS/NEG logic.
    IC694MDL645CA Conformal Coated Input module 24VDC 16 point POS/NEG logic
    IC694MDL646 INPUT MODULE 24 VDC 16 POINT POS/NEG LOGIC 1 MSEC FILTER
    IC694MDL646CA Conformal Coated Input module 24 VDC 16 point POS/NEG logic.  1msecond filtering.
    IC694MDL654 Input module 5/12 VDC (TTL) 32 point POS/NEG logic.
    IC694MDL654CA Conformal Coated Input module 32 points 5/12VDC TTL POS/NEG logic. Termi nation is a Fujitsu connector.
    IC694MDL655 Input module 24 VDC 32 point POS/NEG logic.
    IC694MDL655CA Conformal Coated Input module 24 VDC POS/NEG logic 32 points. 1msec filter.  Interface is a Fujitsu connector.
    IC694MDL658 INPUT 48 VDC POS/NEG 32PT FAST.  Wiring termination is two Fujitsu connectors.
    IC694MDL660 RX3i 24VDC Input Module 32 point.  Module is supported by serial bus andis not limited to the universal base or expansion base.  The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block).  Terminal
    IC694MDL660CA RX3i 24VDC Input Module 32 point.  Module is supported by serial bus andis not limited to the universal base or expansion base.  The module requires a terminal block (IC694TBB032 box style or IC694TBS032 spring clamp style terminal block).  Terminal
    IC694MDL732 Output module 12/24 VDC 0.5 amps 8 points, positive logic.
    IC694MDL734 Output module 125VDC 1 amp 6 points isolated POS/NEG logic.
    IC694MDL734CA Conformal Coated Output module 125VDC, 1amp, 6 point, isolated per point.
    IC694MDL740 Output module 12/24 VDC 0.5 amps 16 points, positive logic.
    IC694MDL740CA Conformal Coated Output module 12/24 VDC 0.5 amps 16 points, positive logic.
    IC694MDL741 Output module 12/24 VDC 0.5 amps 16 points, negative logic.
    IC694MDL741CA Conformal Coated Output module 12/24 VDC 0.5 amp 16 points NEG logic.
    IC694MDL742 Output module 12/24VDC, 1 amp 16 point positive logic ESCP protection.
    IC694MDL752 Output module 5/24VDC (TTL) 0.5 amp 32 point negative logic.
    IC694MDL752CA Conformal Coated Output module, 5/12-24VDC, 32 point NEG logic.
    IC694MDL753 Output module, 12/24VDC POS logic, 32 points. Interface uses Fujitsu connector.
    IC694MDL753CA Output module, 12/24VDC POS logic, 32 points. Interface uses Fujitsu connector.
    IC694MDL754 12/24VDC Output (0.75 amps/point)Module 32 point. Requires terminal block IC694TBBx32 box style or IC694TBSx32 spring clamp.  Terminal block is sold seperately. Output response Time is 0.5ms.
    IC694MDL916 Output module, Isolated Relay, Normally Open, 4 Amp, 16 point.  Requires High Density Terminal Block (IC694TBBx32 or IC694TBSx32). Only compatible with RX3i.Compatible high speed serial bus on both Universal Base and Standard expansion base.
    IC694MDL930 Output module, relay 4 amp, 8 point isolated per point.
    IC694MDL930CA Conformal Coated Relay Output module, 4 amp 8 point isolated
    IC694MDL931 Output module, relay 3 amp form B and C; 8 point isolated
    IC694MDL940 Output module, relay 2 amp 16 point, non isolated.
    IC694MDL940CA Conformal Coated Relay Output module 2 amp, non isolated 16 points.
    IC695MDL664 Smart Digital 24VDC Input module, 16 input channels in two groups of eight.  Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required.
    IC695MDL765 Smart Digital Output Module 24/125 volt DC, ESCP 1A Positive Logic 16 Points.  Module does not ship with terminal block.  IC694TBB032 or IC694TBSx032 terminal block is required.

     

    * Motion and special:

    Part # Description
    IC694APU300 High speed counter module 200KHZ A B and C type.
    IC694APU305 I/O Processor high speed counter for Gray Code Encoder or A QUAD B Encoder.  30 kHz Abolute Encoder or 200 kHz A QUAD B Encoder.
    IC695HSC304 RX3i High Speed Counter, 4 channels.  8 configurable inputs and 7 configurable ESCP outputs.  Module supports high speed counting, input interrupts and programmable limit switch.
    IC695HSC308 RX3i High Speed Counter, 8 channels.  16 configurable inputs and 14 configurable ESCP outputs.  Module supports high speed counting, input interrupts and programmable limit switch.  Module requires PCI bus.  Requires terminal block IC694TBxx32.

     

    Accessories:

    Part # Description
    44A752292-G01 RX3i Blue Plastic Case. Qty 25 Can be used to upgrade Series 90-30 I/O modules to the blue RX3i design.
    44A752292-G02 RX3i terminal block and shroud assembly kit. The kit does not include door or hinge (44A752292-G03) assembly.  Used to upgrade Series 90-30 I/O modules to RX3i
    44A752292-G03 RX3i Door/Hinge assembly kit, qty 25. It does not include the terminal block and shroud Assembly (44A752292-G02).  Must only be used with 44A752292-G02.
    44A752292-G04 RX3i Lens Caps for I/O modules.  Qty 25 in the kit.  Used for replacement or upgrading Series 90-30 I/O modules
    IC694ACC003 Door labels for the IC694MDLxxx I/O modules.  The kit includes two each of the following modules.  IC694ACC300, IC694ACC310, IC694ALG220, IC694ALG221, IC694ALG222, IC694ALG223, IC694ALG390, IC694ALG391, IC694ALG392, IC694ALG442,IC694APU300, IC694APU3
    IC694ACC300 Input simulator module, 16 points.
    IC694ACC310 RX3i Blank filler module
    IC694TBB032 Box Style High Density Terminal Block - 36 Connections
    IC694TBB132 Box Style High Density Terminal Block with extended depth for large wires - 36 Connections
    IC694TBS032 Spring Clamp Style High Density Terminal Block - 36 Connections
    IC694TBS132 Spring clamp style High Density Terminal Block with extended depth for l arge wires - 36 Connections
    IC695ACC002 Replacement plastic cases for RX3i CPU and AC PS, quantity 4.  Does not include front cover.
    IC695ACC003 Door labels for RX3i IC695xxx I/O modules. Kit includes 2 each of IC695ALG600, IC695ALG608, IC695ALG616, IC695ALG626, IC695ALG628, IC695ALG704, IC695ALG708, IC695ALG728, IC695HSC304, IC695HSC308
    IC695ACC400 RX3i CPU Energy Pack. Compatible with IC695CPE305 and IC695CPE310 only. Energy Pack ships with CPE305 and CPE310.
    IC695ACC400CA Conformal Coated.  RX3i CPU Energy Pack.  Compatible with IC695CPE305 and IC695CPE310 only. Energy Pack ships with CPE305 and CPE310.
    IC695CBL001 Energy Pack Cable, 3 ft. (0.91m)
    IC695DEM002 RX3i type 2 demo case. Demo includes CPU, power supply, Ethernet, input simulator, output with ESCP, high speed counter, Universal analog and analog output modules.  Demo also includes QuickPanel control/view includes thermocouple, RTD, analog pot,
    IC695DEM004 Beta i Series 1-Axis Motion Demo Case for use with PACMotion or DSM324i motion controllers
    IC695SPC100 RX3i 10/100/1000base-TX (CAT5 100m) Small Form Pluggable Transceiver
    IC695SPF002 RX3i Single Mode, 100Base-FX (fiber 2km) Small Form Pluggable Transceiver Module
    IC695SPF010 RX3i Single 1000base-LX (fiber 10 km) Small Form Pluggable Transceiver Module
    IC695SPF550 RX3i Single Mode 100base-SX (fiber 550m) Small Form Pluggable Transceiver Module
    IC695STK001 RX3i Power PACkage 1 Starter Kit includes RX3i with software. (includesRX3i with software.  (includes one each IC695CP305,IC695CHS012, IC695LRE001, IC695PSA040, IC695ETM001, IC694ACC300, IC694MDL940 and IC646MPP001.) Limited one RX3i starter kit per
    IC695STK002 RX3i Power PACkage 2 Starter Kit includes RX3i and QuickPanel View 6 inch STD with software (one each IC695CPE305/ IC695CHS012/ IC69 5LRE001/ IC695PSA040/ IC695ETM001/ IC694ACC300/ IC694MDL940/ IC754VSI06STD/ BC646MQP001/ IC646MPP001 and DC power)
    IC695STK003 RX3i Power PACkage 3 Starter Kit includes RX3i(CPE305)/ motion module (Servo andAmplifier sold seperately) and QuickPanel View 6 inch STD wi th software
    IC695STK010 RX3i Profinet Starter Kit. Limited to one per customer per customer site.  Kit includes CPE305, 7 slot base, AC power supply, input and output module, Profinet controller, VersaMax Profinet slave, combination I/O and Proficy Machine Edition.

     

     

     

    CPU Detail
    IC695CPU320 CPU320 - two built-in serial ports.  Controller  Universal Backplane Only, Uses PCI Bus  1GHz  0.07  64Mega bytes    32K  32K  Flash, SRAM   
    IC695CPU310 CPU310 with two built-in serial ports  Controller  Universal Backplane Only, Uses PCI Bus  300MHz  0.23  10Mega bytes    32K  32K  Flash, SRAM   
    IC695CMU310 CMU310 Redundant High Availability CPU  Redundant Controller  Universal Backplane Only, Uses PCI Bus  300MHz  0.23  10Mega bytes    32K  3

     


    Tin mới hơn:
    Tin cũ hơn:

     

    Tin tức

    Chương trình hỗ trợ các nhà chế tạo máy Việt nam với PLC: Cmatic IRO 2012 Chương trình hỗ trợ các nhà chế tạo máy Việt nam với PLC: Cmatic IRO 2012      Cmatic IRO 2012: là sản phẩm PLC Việt đầu tiên được ứng dụng ở nhiề...
    Sản xuất OEM thiết bị BNWAS thế hệ 3 cung cấp cho ngành hàng hải Sản xuất OEM thiết bị BNWAS thế hệ 3 cung cấp cho ngành hàng hải      CommanD đã hoàn thành giai đoạn nghiên cứu và chế mẫu cho sản phẩm BNWA...
    Giải pháp Smart Grid Giải pháp Smart Grid CommanD Automation đang xây dựng các thành phần cơ bản của giải pháp tông thể ch...

    Đối tác và Khách hàng



      

     

    Liên hệ

     

    (08) 2221 1903 / 2203 0445  


    Skype Me™!Skype Me™!

    Ebusiness@commandag.com    

      Hitech@commandag.com

    Thống kê

    mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
    mod_vvisit_counterHôm nay12